Setting Up The Orientation - Barco SIM 5W User Manual

Image 5-2
5. Press ENTER
A dialog box appears on the screen
Image 5-3
6. Enter the new projector address with the digit keys on the RCU, the local keypad or the cursor keys.
How to change the common address ?
1. Proceed in the same way as for the projector address
5.4

Setting up the orientation

What must be done ?
Depending on the mechanical orientation of the projector, the projector's internal settings have to be adapted.
The projector is shipped (default) with a table/front orientation.
How to set the orientation ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Orientation
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired orientation
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
5. Setup
41