Image Files; Introduction To Image Files - Barco SIM 5W User Manual

7. Advanced
4. Use ↑ or ↓ to select Passive Infitec
5. Press → to pull down the menu
6. Use ↓ or ↑ to select ON
Image 7-37
7. Press ENTER to select.
When passive Infitec
7.5 Image files
Overview
• Introduction to Image files
• Load file
• Forced file load
• Auto Image
• Edit file
• Save as (create a custom file)
• Rename file
• Copy
• Delete
7.5.1 Introduction to Image files
Image files
An image file contains the main characteristics of a source (number of active lines,...). The projector's memory contains a list of files
corresponding to the most common sources : standard files.
When a new source corresponds to one of these files, a custom file is created. The custom file is automatically saved if a setting is
altered (contrast, ...). The Save as... function allows to create and save a custom file.
The active file can always be edited in order to fit exactly the source specifications.
File notation
The notation of the image file happens as follows :
/Standard/SXGA+@60.xml
Type of file : standard or custom
Image 7-38
72
Downloaded From projector-manual.com Barco Manuals
is set to ON, the passive Infitec
TM
AutoImage creates automatically the best suited image file (custom file) for a new source. AutoImage is used
when :
- a new source is detected: AutoImage creates a new custom file which can always be edited if necessary.
- the AutoImage is launched via the button on the RCU, the projector's OSD or from the desktop's OSD
file extension = xml
Vertical freq
Resolution
filter will be inserted into the light path of the projector.
TM
R59770324 SIM 5W 22/12/2011