Save As (Create A Custom File) - Barco SIM 5W User Manual

7. Advanced
Image 7-48
UsePictureBox can be disabled (0) or enabled (1). By default, it is disabled which means that only few timings can be changed. In
case of a DVI source this is not a problem.
In very specific situations however (e.g. iBlend), more changes to the timings may be needed, such as the setting of the Start pixels,
Active pixels, Start lines, Active lines. In that case, hit Enter and change the slider to position 1, thus enabling more settings in the
Edit file menu.
Image 7-49
7.5.6 Save as (create a custom file)
Creating a custom file
When the loaded file is a standard file there is a possibility of saving it as a custom file (= creating a custom file) , this is done with
the save as function. The saved file will always be a custom file (saved in the custom directory)
How to save a file ?
1. Press MENU to activate the Tool bar
2. Press → to select the Image files item
3. Press ↓ to Pull down the Image files menu
4. Use ↑ or ↓ to select Save as...
Image 7-50
5. Press ENTER
A dialog box is displayed
Use ←or →, ↓ or ↑ the numeric keys on the remote, or the keypad to edit and change the file name, confirm with ENTER.
78
Downloaded From projector-manual.com Barco Manuals
In the current software versions (1.22 for (Galaxy)NH-12, 1.23 for (Galaxy) NW-12, 1.02 for SIM 5W), changing
the UsePictureBox settings also inverts the interlacing!
For sources that are often used, a custom file should be created. This custom file will then be loaded auto-
matically and will prevent the AutoImage from being launched.
R59770324 SIM 5W 22/12/2011