Creating/Editing A Soft Edge - Barco SIM 5W User Manual

Image 7-180
Image 7-181
How to select an Edit Mode ?
1. When the Edit dialog box is displayed, the Select mode is selected by default.
2. To go to the next mode press ENTER.
3. To return to a previous mode use BACK
7.9.9.4.3

Creating/editing a soft edge

Description
In this example we will create an internal soft edge where we will adjust the left side zone ( displace one point along the x axis).
How to start up the edit dialog box ?
1. Press the MENU key to activate the Tool bar.
2. Push the cursor key ← or → to highlight Display setup
3. Push the ↓ key to pull down the menu.
4. Push ↓or ↑ to select Soft edge and alpha beta planes
5. Push the → key to pull down the menu.
6. Push the cursor key ← or → to highlight Edit...
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
7. Advanced
151