Getting Started; Startup; Adjusting The Image - Barco SIM 5W User Manual

6. GETTING STARTED

Overview
•

Startup

•

Adjusting the image

6.1 Startup
How to start up the projector ?
1. Press the Standby button on the RCU or the local keypad
Image 6-1
The last selected source is displayed
6.2 Adjusting the image
How to adjust the image
1. Use the PiP adjust button on the RCU to select the desired window
F 2
F 1
M E N U
Image 6-2
2. Use the Image setting buttons on the RCU
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
C :
AUTION For the latest version of the product manuals, see http://www.barco.com.
C :
AUTION This projection product contains several optical elements which require a certain warm up time
in order to reproduce initial adjustments. If the environment (e.g. ambient temperature of the surrounding)
is stable, the product will typically reproduce functional performance within 30 minutes and achieve optimal
performance after 45 minutes (advised for multichannel display systems). It should be noted that the heat
dissipation of the product itself might influence its environment; if not monitored and corrected via external
responsive temperature controls, this might affect the typical settle time required.
U C
M E N B A K
E N T E R
PI P
P A U SE L O G O
D I G I
Z O O M
9 0
P H A SE
F 3
B A C K
6. Getting started
51