Lamp; Dimming - Barco XLM H25 Owner's Manual

If a wrong value for an octet is entered, the value will jump automatically to 255.
NETWORK CONFIGURATION
DHCP [ON]
IP ADDRESS 158.150.160.200
SUBNET MASK 158.150.160.201
DEFAULT GATEWAY
158.150.300.300
MAC ADDRESS 01:01:02:DB:FF:89
APPLY
Select with ↑ or ↓
then <ENTER>
Reprogram with ↑ or ↓, ← or →
or numeric keys
'APPLY' to confirm
<EXIT> to return
Menu 8-22

8.6 Lamp

How to display the lamp information
1. Push the cursor key ↑ or ↓ to highlight Lamp. (menu 8-23)
2. Press ENTER to select.
The lamp overview menu will be displayed. (menu 8-24)
This menu indicates :
- The serial number
- The article number of the lamp
- The run time
- The remaining run time for a safe operation
- The number of strikes since the first start up
SERVICE
IDENTIFICATION
PASSWORD
CHANGE PROJECTOR ADDRESS
COMMUNICATION
LAMP

DIMMING

CONVERGENCE
DIAGNOSIS
CLO
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-23
8.7 Dimming
How to dim
1. Push the cursor key ↑ or ↓ to highlight Dimming. (menu 8-25)
2. Press ENTER to select.
A dimming bar scale will be displayed.
3. Push the cursor key ↑ or ↓ to to dim.
SERVICE
IDENTIFICATION
PASSWORD
CHANGE PROJECTOR ADDRESS
COMMUNICATION
LAMP
DIMMING
CONVERGENCE
DIAGNOSIS
CLO
Select with ↑ or ↓
then <ENTER>
<EXIT> to return
Menu 8-25
R5976690 XLM H25 03/09/2004
LAMP
SERIAL NUMBER: 1012000
ARTICLE NUMBER: R9806510
RUN TIME: 11h
REMAINING RUNTIME: 489h
NUMBER OF STRIKES: 55
<EXIT> to return
Menu 8-24
8. Service
87