3. Installation guidelines
•
full pitching allowed (360°)
Full pitching
allowed (360°)
Image 3-2
Pitch possibilities
•
Do not put the projector on either side to project an image
Image 3-3
Side projection limitations
3.4
Airflow
Airflow
The Air Intake Vent is located on the bottom side of the projector while the Exhaust Vent can be found on the left rear side of the
projector. Make sure the projector is installed in a location so that the air inlets and outlets for the cooling system are not obstructed.
12
Downloaded From projector-manual.com Barco Manuals
Do not put the projector
on either side
to project an image!
R59770324 SIM 5W 22/12/2011