Component Video; Rgb Connections - Barco SIM 5W User Manual

• 3 for the color signals R,G,B
• 2 for the sync signals H (horizontal sync), V (vertical sync)
RGBS : If the source disposes of a composite sync output i.e. one wire includes the horizontal and the vertical sync then the V BNC
must not be connected, resulting in 4 BNC being connected (V is free).
RG B : If the source disposes of a sync on Green output (i.e. the Green color signal includes the horizontal and the vertical sync),
s
then the H and V BNC's must not be connected, resulting in 3 BNC being connected (H and V are free).
RGBHV
RG
RGBS
Table 4-6
How to use the BNC's in case of different RGB signals
How to connect an RGB signal ?
1. Connect the 5 or 4 BNC cables to the projector's RGB input
Image 4-15

RGB connections

4.9.6

Component video

Component video connection
A component video signal is available can also be mentioned in the following way:
• YUV
• Pr Y Pb
• (R-Y) Y (B-Y)
How to connect a component video signal?
1. Connect the 3 BNC cables to the projectors Pr Y Pb input.
R59770324 SIM 5W 22/12/2011
Downloaded From projector-manual.com Barco Manuals
R
R
B R
s
R
The RGB 5 BNC input can also be used to connect a component video source : see Connecting a Component
video source.
DVI-D COMPUTER
DVI-D HDCP COMPUTER
BNC Connector
G B
G B
G B
s
G B
Projector
4. Installation
H V
H V
- -
-
S
27