Software Installation; Load Factory Default - Moxa Technologies ioLogik E1200 Series User Manual

ioLogik E1200 Series

Software Installation

ioSearch is a search utility that helps the user locate ioLogik E1200 devices on the local network. Find the
ioSearch utility in the Document and Software CD under Software  ioSearch, or download the latest version
from Moxa's website.
1. Installing from the CD: Insert the Document and Software CD into the host computer. In the root directory
of the CD, locate and run SETUP.EXE. The installation program will guide you through the installation
process and install the ioSearch utility. You can also install the MXIO DLL library separately.
2. Open ioSearch: After installation is finished, run ioSearch from Start
 
Utility ioSearch
3. Search the network for the server: On the menu bar, select System
A dialog window will pop up. Click Start Search to begin searching for the ioLogik E1200.
If multiple ioLogik E1200 units are installed on the same network, remember that each unit has the same
default IP address. You will need to assign a different IP address to each unit to avoid IP conflicts.

Load Factory Default

There are three ways to restore the ioLogik E1200 to the factory default.
1. Hold the RESET button for 5 seconds.
2. Right click the specified ioLogik in the ioSearch utility and select "Reset to Default".
3. Select "Load Factory Default" from the web console.


Auto Scan Active Ethernet I/O Server.
2-5
Initial Setup

Program Files MOXA IO Server