Advertisement
Hardware Installation Information
STEP 1: After removing the NPort P5150A device server from the box,
if you are not using a PoE switch, the first thing you should do is
connect the power adaptor.
STEP 2: Connect the NPort P5150A device server to a network. Use a
standard straight-through Ethernet cable to connect to a PoE switch.
STEP 3: Connect the NPort P5150A device server's serial port to a
serial device.
STEP 4: Placement options.
In addition to placing the NPort P5150A on a desktop or other
horizontal surface, you may also make use of the DIN-Rail or Wall
Mount options, as illustrated below.
Wall Mount
DIN-Rail
Software Installation Information
For the NPort's configuration, the default IP address of the NPort is:
LAN: Static IP = 192.168.127.254; netmask = 255.255.255.0
You may log in with the password moxa to change any settings to
meet your network topology (e.g., IP address) or serial device (e.g.,
serial parameters). NPort Administration Suite consists of useful
utility programs that are used to configure and manage your NPort. To
install NPort Administration Suite, please download the utility from
Moxa's support website: https://www.moxa.com/support. To view
detailed information about the NPort Administration Suite, please
refer to the user manual on the support website.
- 4 -
Advertisement
