Configuring Hpe Storeeasy 1000 Storage; Initial Configuration Tasks; Using Initial Configuration Tasks; System Settings - HP StoreEasy 1000 Administrator's Manual

3 Configuring HPE StoreEasy 1000 Storage

Initial Configuration Tasks

The Initial Configuration Task (ICT) window enables you to configure your system. After the initial
configuration is complete, the ICT window launches automatically for a user who is a member
of the local administrator group. You can open only one instance of the ICT at a time.
Use ICT to perform the following configuration tasks:
Update system settings, such as changing the local administrator password, time zone, save
reseller information, and so on.
Launch Network Configuration wizard to configure and validate the network configuration.
Configure email alerts and register product.
Create storage pools and virtual disks.
Enable software updates and enhancements directly from Windows update.
Set up optional data protection solutions on the HPE StoreEasy 1000 Storage with
cloud-based data backup by replicating data using Vision Solutions Double-Take Availability.
Both of these data protection solutions require separate licensing, but are available to use
for a limited time via a free trial license.
The online help is available for each configuration task in the ICT window. You can launch the
online help by clicking

Using Initial Configuration Tasks

Once the HPE StoreEasy 1000 Storage is connected to your network and to external storage
enclosures (if present), powered up and logged on, the system needs to be configured for
completing the installation. If you do not want to open the ICT window every time you logon,
select the Do not show this window at the next logon check box in the window. You can also
launch ICT by opening a command prompt and typing
C:\Windows\System32\OEMOOBE\OEMOOBE.EXE.
NOTE:
The ICT refreshes periodically, as indicated by a message in the lower right corner of the
window. If you select an ICT task while a refresh is in progress, there is a delay before the
application for that task is launched. You can also refresh ICT by pressing F5.
The following tasks are included in the ICT:

System Settings

Networking
Notifications
Storage Configuration
Protect This Server
System Settings
This task group enables you to configure the system settings. The following tasks are included
in this group:
Set local administrator password—Enables you to change the administrator user password.
The default password is the password that you entered during the initial setup of the server.
To change the password, enter the new password in the New password and Confirm
password fields and click OK.
for each task or by pressing F1.
Initial Configuration Tasks 49