HP StoreEasy 1000 Administrator's Manual page 106

The System tab contains three additional tabs:
Overview
Hardware
Software
Overview
Click Overview to view the system information and properties of the selected nodes. The
Overview tab is divided into two panes. The left pane displays the node information and the right
pane provides a summary of the system properties. To view additional details, click Summary
and then click Details. The StoreEasy Dashboard uses the following icons to display the system
state:
—Indicates health OK
—Indicates health warning
—Indicates health degraded
The following table describes the fields that are available on this screen:
Field
State
Version
S/N
SR version
Memory
System
Up time
Properties
Hardware
Click Hardware to view the hardware components in the system. The hardware details of the
selected nodes are displayed.
106 Managing HPE StoreEasy 1000 Storage
Description
Icons that represent the status of the system.
StoreEasy software version.
Product serial number of the system.
Version of the SR (Service Release). If no SR is installed,
None is displayed.
Average value of the physical memory utilization
percentage over a period of time. You can configure the
period using the dashboard configuration file.
Local name of the system.
Time since the system was last restarted.
Displays the following reseller details:
Asset details, such as asset name and asset serial
number.
Contact details, such as contact name and contact
phone.
Other details, such as PO number, purchase date,
installation date, and support ID.
The reseller details are extracted from the Reseller
Information Tool.
If you select Details, the following properties are
displayed:
SR date and version.
IP address of the iLO.