Importing Network Configuration - HP StoreEasy 1000 Administrator's Manual

The following table describes the sample values for these tags:
Tag
<Name>
<DHCPEnabled>
<IsDHCPIP> and <IsDHCPDNS>
<StaticEnabled>
<IsStaticIP> and <IsStaticDNS>
<IPAddress>
<SubnetMask>
<DefaultGateway>
<PrimaryDNS>
<SecondaryDNS>
<TertiaryDNS>
IMPORTANT:
If the DHCPEnabled or StaticEnabled tags are modified, the values in the IsDHCPIP,
IsDHCPDNS, IsStaticIP, and IsStaticDNS tags must be changed accordingly.
If the StaticEnabled, IsStaticIP, and IsStaticDNS tags are set to True and no
values are specified for IPAddress, SubnetMask, and PrimaryDNS, the setting of the IP
configuration fails.
The StaticEnabled and DHCPEnabled tags cannot be set to true at the same time.

Importing network configuration

The NCTConfig.xml file enables you to directly import the network configuration settings from
one server to another and apply the network configuration settings for all adapters at one instance.
After successfully importing the settings, when you relaunch NCT, a confirmation message is
displayed indicating if you want to use the last used network configuration settings. If you click
Yes, the NCT wizard loads the network configuration details from the NCTConfig.xml file and
displays the existing interface details along with the team details. You can reconfigure the desired
network interface from the available interfaces and create new teams or delete existing teams.
IMPORTANT:
with the default VLAN. For example, if the complete interface name is Ethernet 2 Team
–VLAN Default, then you must change only the prefix, that is, Ethernet 2 Team. The default
VLAN name, which is VLAN Default in this example, must not be changed.
To import the network configuration settings from the NCTConfig.xml file:
64 Managing HPE StoreEasy 1000 Storage
While changing the interface name, you must change only the prefix associated
Sample value
Ethernet 3, 1 GbE Public 1, and so on.
true or false.
If DHCPEnabled is set to true, the value in this tag
must be set to true.
If DHCPEnabled is set to false, the value in this tag
must be set to false.
true or false.
If StaticEnabled is set to true, the value in this
tag must be set to true.
If StaticEnabled is set to false, the value in this
tag must be set to false.
16.78.90.32, 10.1.2.21, 128.90.34.123, and so
on.
255.255.248.0,255.255.0.0, and so on.
16.78.88.1, 128.90.34.21, and so on.
16.78.22.12, 128.89.23.12, and so on.
16.78.22.12, 128.89.23.12, and so on.
16.78.22.12, 128.89.23.12, and so on.