Configuring Failover Properties For Multi-Site Environments; Additional Access Methods; Using The Remote Desktop Method; Using The Telnet Method - HP StoreEasy 1000 Administrator's Manual

2. Reboot the server manually by entering one of the following commands:
PS C:\Users\Administrator> shutdown –r –t 0.
or
PS C:\Users\Administrator> Install-WindowsFeature
Server-Gui-Mgmt-Infra,Server-Gui-Shell –Restart.
NOTE: Transitioning to the Server Core mode disables ICT. After transitioning back to Server
with a GUI mode, you must manually enable ICT by executing the following command:
PS C:\Users\Administrator>dism /online /enable-feature
/featurename:OEM-Appliance-OOBE
Then, install ICT from C:\hpnas\Components\ManagementTools.

Configuring failover properties for multi-site environments

You can configure failover properties for multi-site environments using DFS Management, which
is available from the Tools menu in Windows Server Manager (Tools→DFS Management).
For detailed instructions, see the Microsoft TechNet article, DFS Step-by-Step Guide for Windows
Server 2008, which is available at:
http://technet.microsoft.com/en-us/library/cc732863(v=ws.10).aspx
NOTE:
The information in the article applies to Windows Storage Server 2012 and 2012 R2.
The article provides instructions to configure both DFS Namespace and DFS Replication.
The prerequisites listed in the article are already installed with the software.
You can start at the section entitled, Overview of the DFS Management Snap-in.

Additional access methods

After the HPE StoreEasy 1000 Storage installation process is complete and the system's IP
address has been assigned, you can additionally use the Remote Desktop and Telnet methods
to access the system.

Using the Remote Desktop method

Remote Desktop provides the ability for you to log on to and remotely administer your server,
giving you a method of managing it from any client. Installed for remote administration, Remote
Desktop allows only two concurrent sessions. Leaving a session running takes up one license
and can affect other users. If two sessions are running, additional users will be denied access.
To connect the HPE StoreEasy 1000 Storage system to a network using the Remote Desktop
method:
1. On the PC client, select Start→Windows PowerShell. Type mstsc and press Enter.
2. Enter the IP address of the HPE StoreEasy 1000 Storage in the Computer box and click
Connect.
3. Log on to the HPE StoreEasy 1000 Storage with the administrator user name and password.

Using the Telnet method

Telnet is a utility that enables you to connect to machines, log on, and obtain a command prompt
remotely. By default, Telnet server is not installed.
54 Configuring HPE StoreEasy 1000 Storage