HP StoreEasy 1000 Administrator's Manual page 173

7. Review the items selected for the backup and click Backup.
A backup of the items is created and saved at the specified destination. The backup activity
is also displayed on the Local Backup window.
Perform the following steps to restore the system with Windows Recovery Environment:
1. Do one of the following:
For direct access, connect the cable and insert the System Recovery DVD in the
StoreEasy system or attach a bootable USB flash drive that is prepared with a System
Recovery image.
For remote management access, connect to the server using iLO from the client PC.
Insert the System Recovery DVD in the StoreEasy system or attach a bootable USB
flash device that is prepared with a System Recovery image.
2. Reboot the server to either the USB flash device or USB DVD drive.
The system BIOS attempts to boot to the USB device by default. Watch the monitor output
during the boot as you may need to press a key to boot to the USB media.
NOTE: If directly connected, you might have to change the BIOS settings to ensure proper
boot sequence. If connected remotely, you might have to change some iLO settings to ensure
proper boot sequence.
3. In Windows Boot Manager, select Windows Recovery Environment.
The recovery environment is loaded and the System Recovery Options wizard opens.
4. Select the keyboard layout.
5. Select Troubleshoot to access the repair tools that allow you to recover or troubleshoot
Windows.
6. Select Advanced options to access the advanced repair options.
7. Select System Image Recovery to restore the system using a previously created system
recovery image.
8. Select the target operating system to be restored.
The Re-image your computer wizard is launched, which scans the computer for a system
image. If it is unable to locate a system image, the following message is displayed:
9. Attach an external drive or insert a DVD that contains the backup files and click Retry. If
you want to recover from the network, click Cancel.
10. Select one of the following options and click Next:
Use the latest available image—Select to use the backup image that was recently
created. If you are restoring from the network, this option is unavailable.
Select a system image—Select to restore from the network.
11. If you are restoring from the network, click Advanced, and then select Search for a system
image on the network.
12. Click Yes on the confirmation message to proceed with the network connectivity.
13. Enter the share path where the backup image is stored and click OK.
Backing up and restoring HPE StoreEasy 1000 Storage with Windows Recovery Environment 173