HP StoreEasy 1000 Administrator's Manual page 164

Table 8 Storage Management Provider errors (continued)
Error code Error message
0x25005068 The virtual disk could not complete the operation
because its health or operational status does not
permit it.
0x24005069 Enclosure not found in cache.
0x2500506A Failed to update enclosure in cache.
0x2400506B Failed to get the enclosure for the physical disk.
0x2400506C Failed to get WMI class names to subscribe.
0x2100506D SMP assembly file not found.
0x2700506E The registry key
HKLM\HARDWARE\Description\System\BIOS
was not found.
0x2700506F The registry key
HKLM\HARDWARE\Description\System\BIOS\
SystemProductName
was not found.
0x21005070 SmartArray.dll file not found.
0x21005071 Raptor.dll file not found.
0x21005072 Failed to get the library name to load.
0x25005073 Failed to release the lock.
0x24005074 Failed to create the mutex.
0x24005075 Failed to get the proxy to the controller library.
0x25005076 The resiliency setting does not match the pool's
resiliency setting.
0x25005077 The operation was successful but the storage
provider cache is out of date. You must update
the storage provider cache before proceeding
further.
0x25005078 The specified friendly name already exists.
0x20005079 The Storage Pool could not complete the
operation because its health or operational status
does not permit it.
0x2500507A One of the physical disks specified is assigned to
other storage pool.
0x2300507B This operation is supported only for spare drives.
0x2000507C The physical drive could not complete the
operation because its health or operational status
does not permit it.
164 Troubleshooting, servicing, and maintenance
Recommended action
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Restart Storage Management Service.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Restart Storage Management Service.
Restart Storage Management Service.
Re-install Storage Management Provider.
The system is in an invalid state. Contact HPE Support.
The system is in an invalid state. Contact HPE Support.
Re-install Storage Management Provider.
Re-install Storage Management Provider.
Re-install Storage Management Provider.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Restart Storage Management Service.
Restart Storage Management Service.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Check the health and operational status of the physical
drives. Please retry the operation.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Retry the operation.
Check the health and operational status of the physical
drives. Please retry the operation.