Validate Network Information; Cabling Hpe Storeeasy 1000 Storage - HP StoreEasy 1000 Administrator's Manual

Hide thumbs Also See for StoreEasy 1000:
Table of Contents

Advertisement

Validate network information

Complete the tests in
administrator to confirm test results.
Table 3 Validation tests
Test
Ping the IP address of the system
from another system on the same
network.
Ping the IP address of some other
system on the same network form
the system.
Ping the name of the system from
another system on the same
network.
Ping the name of some other
system on the same network form
the system.
If you will be adding the system to an Active Directory domain, some additional tests include:
Ping the domain controller from the
system.
Verify the network path to the
domain controller and DNS servers
is correct.
Additionally, HPE recommends that you also verify the iLO IP address and name resolution.
However, this is not critical to support a file server.

Cabling HPE StoreEasy 1000 Storage

The StoreEasy systems support both single domain and dual domain cabling using D2000,
D3000, D6020, and D6000 disk enclosures, depending on the Smart Array RAID controller that
is installed in the system. See
enclosures are connected, using a single data path, to the Smart Array controller
system. In a dual domain, external disk enclosures are connected, using two data paths, to a
single Smart Array RAID controller in the StoreEasy system. For more detailed information about
single and dual domains, see the technology brief entitled, "Redundancy in enterprise storage
networks using dual-domain SAS configurations" located at: http://h20565.www2.hp.com/portal/
site/hpsc/public/kb/docDisplay/?docId=c01451157.
Table 4 Controller, disk enclosure, and single/dual domain support
Controller
model
P441
1. Smart Array controllers included as standard with StoreEasy 1x50 products do not support external disk enclosures.
An optional Smart Array controller with external ports need to be ordered to support external enclosures.
36
Installing HPE StoreEasy 1000 Storage
Table 3 (page 36)
Command(s) to execute
ping <system address>
ping <system address>
ping <node 1 name>
ping <node 1 fqdn>
ping <node 1 name>
ping <node 1 fqdn>
ping <domain controller address>
ping <domain controller name>
pathping <domain controller address>
pathping <domain controller name>
pathping <DNS server address> (Repeat for each
DNS server)
pathping <DNS server name> (Repeat for each DNS
server)
Table 4 (page 36)
Supported in
StoreEasy
Disk enclosure
systems
supported
1450, 1550, 1650,
D2000
1650E, 1850
D3000
to verify network connectivity. Consult with your network
for details. In a single domain, external disk
Single domain
support
Y
Y
Successful?
(Y/N)
1
in the StoreEasy
Dual domain support
Y
Y

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents