6.
Open the cable management holder.
7.
Disconnect the SATA cables from the M.2 SSD enablement board and the system board.
M.2 SSD SATA cable disconnection when the enablement board is installed in the
onboard PCIe expansion slot 1 or 2.
M.2 SSD SATA cable disconnection when the enablement board is installed in the PCI
riser cage.
8.
If the M.2 SSD enablement board is installed in the PCI riser cage, remove the riser cage.
9.
Remove the M.2 SSD enablement board.
For detailed instructions on the removal and replacement procedures, see the HPE Apollo 4200
Gen9 Server Maintenance and Service Guide available at http://www.hpe.com/support/
proliantgen9/docs.
Software components
Windows Storage Server 2012 R2 Standard Edition comes preinstalled and activated on the
StoreEasy 1x50 Storage. The system configuration also includes the Initial Configuration Tasks
window, StoreEasy tools, Windows Server Manager, which are used to set up and manage HPE
StoreEasy 1000 Storage.
30
HPE StoreEasy 1000 Storage