Restoring The Factory Image With A Dvd Or Usb Flash Device; Backing Up And Restoring Hpe Storeeasy 1000 Storage With Windows Recovery Environment - HP StoreEasy 1000 Administrator's Manual

Hide thumbs Also See for StoreEasy 1000:
Table of Contents

Advertisement

5.
Click Burn.
On completion, the appropriate status is displayed on the screen.

Restoring the factory image with a DVD or USB flash device

1.
Do one of the following:
a.
For direct access, insert the System Recovery DVD or a bootable USB flash device
(prepared with a System Recovery image).
b.
For remote management access, connect to the server using iLO from a client PC.
Insert the System Recovery DVD in the client PC or attach a bootable USB flash device
that is prepared with a System Recovery image.
2.
Reboot the server blade to either the USB flash device or USB DVD drive.
The system BIOS attempts to boot to the USB device first by default. Watch the monitor
output during the boot as you may need to press a key to boot to the USB media.
NOTE:
boot sequence. If connected remotely, you may have to change some iLO settings to ensure
proper boot sequence.
3.
Click the option for the StoreEasy System Recovery.
The recovery process completes with minimal user intervention required. The server
automatically reboots more than once.
IMPORTANT:
4.
Remove the directly connected DVD or flash device (or remotely connected iLO virtual DVD
or flash device) from the server. Be sure to reconnect any external storage that was detached
and reboot the server before proceeding.
Backing up and restoring HPE StoreEasy 1000 Storage with Windows
Recovery Environment
To use Windows Recovery Environment, you must have created a system backup with the
Windows Server Backup utility. You can either perform a single back up or schedule a regular
back up.
Perform the following steps to create a one-time system backup using Server Manager:
1.
Open Server Manager and click Tools→Windows Server Backup.
2.
In the Local Backup window, create one-time backup of the data by performing one of the
following steps:
From the Action menu, select Backup Once.
In the left pane, right-click on Local Backup and select Backup Once.
The Backup Once Wizard is launched.
3.
During one-time backup, the Different options option is selected by default. The Schedule
backup options is unavailable. Click Next to continue.
4.
Select Full Server (recommended) to backup all server data, applications, and system
state and click Next to continue.
5.
Select Remote shared folder as the destination type and click Next to continue.
6.
Enter the path to the remote folder in Location and select the desired option in the Access
control group. Click Next to continue.
172 Recovering HPE StoreEasy 1000 Storage
If directly connected, you may have to change the BIOS settings to ensure proper
Do not interrupt the recovery process.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents