HP StoreEasy 1000 Administrator's Manual page 28

2. Remove all power:
Disconnect each power cord from the power source.
Disconnect each power cord from the server.
3. Extend the server from the rack.
4. Remove the access panel.
5. Remove the PCIe riser cage.
6. Remove the M.2 SSD Enablement Board slot cover.
7. Install the M.2 SSD Enablement Board.
IMPORTANT:
controller.
Insert one end of each SATA cable into one of the SATA connectors on the M.2 SSD
Enablement Board, and then insert the other end of the SATA cable into one of the data
ports on the server.
Firmly seat the M.2 SSD Enablement Board into the x4 PCIe slot on the server.
◦
◦
28 HPE StoreEasy 1000 Storage
The PCIe M.2 SSD Enablement Board does not connect to an array
M.2 SSD enablement board installed in the onboard PCIe3 x8 expansion slot 1
M.2 SSD enablement board installed in the onboard PCIe3 x16 expansion slot 2