HP StoreEasy 1000 Administrator's Manual page 163

Table 8 Storage Management Provider errors (continued)
Error code Error message
0x21005052 Failed to initialize the MI Application.
0x21005053 The Storage Management Service is not able to
host the SMP.
0x26005054 The service failed to subscribe for events.
0x24005055 Failed to get the proxy object.
0x21005056 Failed to load the SMProvider DLL. Either it is not
registered or is unable to load its dependencies.
0x25005059 Failed to get all LUNs for the disk from the
controller.
0x2500505A Failed to remove association from the provider
cache.
0x2500505B The operation was successful, but it has resulted
in the storage pools being renamed.
0x2500505C The operation was successful, but it has resulted
in the storage pools being renamed.
0x2000505D The operation was successful, but it has resulted
in the storage pools being renamed.
0x2500505E Failed to get all logical drives from cache.
0x2500505F Failed to get the controller for the logical drive
from cache.
0x25005060 The disk(s) cannot be added to this pool because
it contains at least one LUN requiring RAID level
migration.
0x21005061 Failed to remove partition data from the logical
drive. You must manually clear the disk or delete
the partition. Otherwise, subsequent volume
creation requests might fail.
0x20005062 The format of the specified RAID level is invalid.
Valid RAID levels are RAID 0, RAID 1, RAID 10,
RAID 5, RAID 6, RAID 50, RAID 60, RAID 10
(ADM), RAID 50 (2), RAID 50 (3), RAID 50 (4),
RAID 50 (5), RAID 1 (ADM), RAID 60 (2), RAID
60 (3), RAID 60 (4), RAID 60 (5).
0x20005063 The format of the specified RAID level is invalid.
Valid RAID levels are RAID 0, RAID 1, RAID 10,
RAID 5, RAID 6.
0x23005064 The length of the virtual disk friendly name
exceeds the maximum supported length.
0x24005065 Failed to get the pool from the logical drive.
Recommended action
Re-install Storage Management Provider.
Re-install Storage Management Provider.
Refer to the troubleshooting guide.
Restart HPE Storage Management Service.
Re-install Storage Management Provider.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Update the storage management provider cache by
invoking Windows PowerShell command
Update-StorageProviderCache.
Re-install Storage Management Provider.
Select valid RAID level.
Select valid RAID level.
Retry the operation.
Restart Storage Management Service.
Error codes 163