Configuring the storage
Thorough planning is critical to the successful and efficient deployment of any
storage array system. As discussed in Chapter 1:
All
Deployments, page 15, plans should include decisions about total system
capacity, fault-tolerance levels (availability), and performance.
Storage configuration tasks include:
Note:
Verify that both HBAs in each server have been granted access to the storage.
Refer to the Secure Path documentation for additional configuration information.
Perform these tasks using your chosen configuration utility. Refer to the
appropriate user documentation for procedural instructions.
Go to
Information, page 96 to record information about your storage.
Modular Smart Array 1500 cs Installation Guide
Creating arrays (LUNs)
Identifying the operating system of each HBA connected to the MSA1500 cs
Entering Selective Storage Presentation (SSP) or Access Control List (ACL)
settings to isolate the storage from unauthorized access
In multi-path configurations:
Table
12:
Hard Drive
Configuration Procedures - Windows Environments
Installation Procedures -
Information, page 92 and
Table
13:
Array (LUN)
63