Power On The Server And Log On - HP StoreEasy 1000 Administrator's Manual

IMPORTANT:
StoreEasy 1000 Storage. When the installation process completes and the server's IP addresses
have been assigned, you can then additionally use the remote desktop method to access HPE
StoreEasy 1000 Storage.
Direct attach—This access method is mandatory if your network does not have a DHCP
(Dynamic Host Configuration Protocol) server. Connect the following cables to the back
panel of HPE StoreEasy 1000 Storage in this sequence: keyboard, mouse, network cables,
monitor cable, and power cable.
NOTE:
Storage.
iLO—Access HPE StoreEasy 1000 Storage using the iLO remote management method:
1. Connect a network cable to the iLO port located on the back of the HPE StoreEasy
1000 Storage system.
2. Connect a power cable to HPE StoreEasy 1000 Storage.
3. Locate the iLO Network Settings tag attached to the HPE StoreEasy 1000 Storage and
record the default user name, password, and DNS name.
4. From a remote computer, open a standard Web browser and enter the iLO management
hostname of the HPE StoreEasy 1000 Storage.
NOTE:
your network's DHCP server. The hostname found on the iLO tag is automatically
registered with your network's DNS server. If the DHCP configuration is not possible or
the system is not found in DNS, use the direct attach method to configure iLO with a
static IP address.
5. Using the default user information provided on the iLO Network Settings tag, log on to
iLO, and then launch a remote console to HPE StoreEasy 1000 Storage.
For detailed instructions on using iLO remote management software, see the HPE iLO
4 User Guide, which you can search for (by product name) at https://www.hpe.com/
support/manuals.

Power on the server and log on

1. Power on the system by pushing the power button on the front panel. If using iLO, click
Momentary Press under the Power Switch menu of the remote console.
The HPE StoreEasy 1000 Storage system starts and displays the Setup Windows wizard.
2. Select the desired language, country or region, language settings, keyboard layout, and
click Next.
3. Accept the license agreement and click I Accept.
4. When prompted, enter a password of your choice and click Finish. The password that you
enter must be the one you can remember.
5. When prompted, press CTRL+ALT+DELETE to log on to the system. If using iLO, click the
Ctrl-Alt-Del menu item in the Keyboard menu of the remote console.
6. When prompted, enter the password that you set in
The installation process continues until complete, which takes approximately 10–15 minutes.
When the installation completes, the server reboots.
7. Press CTRL+ALT+DELETE to log on to the system.
48 Installing HPE StoreEasy 1000 Storage
Only the direct attach and iLO access methods can be used to install HPE
The keyboard, mouse, and monitor are not provided with HPE StoreEasy 1000
By default, iLO obtains the management IP address and subnet mask from
Step 4.