Installing The Hpe Storeeasy 1000 Storage Hardware - HP StoreEasy 1000 Administrator's Manual

The serial number is located in several places:
Top of the HPE StoreEasy 1000 Storage system
Back of the HPE StoreEasy 1000 Storage system
Inside the HPE StoreEasy 1000 Storage system's shipping box
Outside the HPE StoreEasy 1000 Storage system's shipping box
The COA card is located inside the shipping box. There is also a COA sticker with product key
affixed to the top of the HPE StoreEasy 1000 Storage system. The electronic copy of the EULA
installed with the system is available at %SystemDrive%\Windows\System32\license.rtf.

Installing the HPE StoreEasy 1000 Storage hardware

If your HPE StoreEasy 1000 Storage system is fully racked and cabled, go to
HPE StoreEasy 1000 Storage" (page
For the 1450, 1650, 1650 Expanded, and 1850 systems, install the rail kit and insert and secure
the storage system into the rack by following the Rack Rail Kit Installation Instructions.
Figure 21 Shipping screw
Figure 22 Shipping screws on the rack ears
The 1650E has shipping screws that need to be removed prior to installing the system in the
rack. The removal of these screws will allow the front drive cage to be extended out of the rack
providing access to the second drive cage. If you ordered the HPE Tower to Rack Conversion
Tray Universal Kit for the purpose of installing the 1550 tower model in a rack, use the provided
tower-to-rack conversion kit installation instructions to install the tower hardware into the rack.
47).
Installing the HPE StoreEasy 1000 Storage hardware
"Connecting to
35