7
Starting up the Service Mode.
Use the arrow keys to highlight SERVICE in the Adjustment Mode menu and then press ENTER.
Some items in the Service mode are password protected (when the password function is active). Enter your password to continue.
All other password protected items are now also available if you stay in the adjustment mode.
ENTER continues to the Service mode main menu.
EXIT returns to the operational mode.
Overview flowchart SERVICE MODE.
SERVICE MODE
R5976101 BARCO CINE 5 ___________________________________________________________________________________
SERVICE MODE
Adjustment Mode
Guided
Random Access
Installation
Service
or
Select with
then <ENTER>
<EXIT> to return
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETINGS
I2C DIAGNOSTICS
SERVICE MODE
PROJECTOR SETUP
MEMORY MANAGEMENT
COMMON SETTINGS
I2C DIAGNOSTICS
or
Select with
then <ENTER>
<EXIT> to return
IDENTIFICATION
TOTAL RUNTIME
CHANGE PASSWORD
CHANGE PROJECTOR ADDRESS
CHANGE LANGUAGE
CHANGE BAUD RATE
POWERUP MODE
COMMON ADDRESS
COPY A BLOCK
DELETE A BLOCK
DELETE ALL BLOCKS
ALL SETTINGS TO MIDPOS
R & B CONVERGENCE MID
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
Service Mode
7-1