Editing A Contact; Set Ring Signal For A Contact - Avaya 3740 User Manual

10. Press "OK".
11. Press "Save".
A specific ring signal can be set for each contact, see
page 75.
Note: If the parameter Force stimuli ringing is enabled, the handset uses the system-provided ring
signals instead of the local ring signals. See the Configuration Manual for the Avaya 374x handsets.
This function is applicable in legacy systems only (stimuli).

Editing a contact

Note: It is not possible to edit a company phonebook contact. The contacts are indicated by a icon
front of the name.
1. Enter the menu by pressing "Menu".
2. Select
3. Select "Edit contact".
4. Select contact.
5. Press "Edit".
6. Select "Name", "Work number", "Mobile number", "Other number", or "Ring signal".
7. Press "Edit".
8. Enter new name, number and/or select new ring signal.
Tip:
A variable or character U can be added to the Work/Mobile/Other number field to
Tip:
allow the user to enter additional numerical characters before calling the number.
See
9. Press "OK".
10. Press "Save".

Set Ring Signal for a Contact

A specific ring signal can be set for each contact.
1. Add/edit a contact.
2. Select "Ring signal"
3. Select the ring signal to be used for the selected contact.
4. Press "Back" and the press "Save".
Avaya 374x DECT Telephones - User Guide
in the menu.
Admin menu on page 109 for more information.
Set Ring Signal for a Contact
Menu operation
on
in
75
02/2016