Note:
Audio transfer is visible if Bluetooth connection is active.
Note:
Starting a new call during a call
1. Press "More" during the call.
2. Select "New Call".
3. Press "Select".
Note: Enter the number and press
Toggling between calls
You have started a new call during a call, and the first call is on hold.
1. Press Soft key R.
The telephone toggles between the calls.
Note:
You can also switch between the call via Soft key More > Switch.
Note:
Ending a call
You have started a new call during a call, and the first call is on hold.
1. Press the On-Hook key.
This action ends the current call. The held call rings again as priority call.
Note:
You can also end the call via the Soft key More > End Call.
Note:
You can end a call by putting the telephone in a charger according to the In
Charger > Call behavior > End call setting. Note that all ongoing calls will be
disconnected. See Installation and Administration Manual, DECT R4.
Call back
When a call is made to a busy handset, an automatically call back can be made when the busy
handset is free. When a busy tone sounds, do as follows:
1. Press "More".
2. Select "Call back"
3. Press "Select".
Avaya 374x DECT Telephones - User Guide
, or "Call".
Calling
59
02/2016