Calling; Incoming Call; Answering A Call; Declining A Call - Avaya 3740 User Manual

Calling

Incoming call

The flashing LED, accompanied by a ring signal and/or a vibrating handset, gives a notice of a
call. Ring signal and vibrator can be disabled, see
The calling party's handset number or name is shown. The name is shown if the calling party's
handset number is stored in the local phonebook.
NOTE: If the parameter Stimuli call phonebook lookup is disabled, the system-provided call
information is used instead. This means that if a calling party's name is saved in the phonebook, it will
not be displayed. This function is only applicable in legacy systems (stimuli).

Answering a call

When the signal sounds, press
loudspeaking mode
information is available.
Tip:
When a headset is connected to the handset, the headset button can be used to
Tip:
answer the call. I
A call may also be answered in the following ways:
Automatically and Loudspeaking: When Automatically is enabled, all incoming calls are
●
connected automatically. See
With a predefined message. This lets the use decline the call, but still acknowledge its
●
receipt, by sending a predefined text message to the caller. See
Message with a Predefined Message

Declining a call

Your telephone rings.
1. Press On-hook key to decline the call.
Note:
A priority call cannot be declined.
Note:
1. When Bluetooth is enabled, the loudspeaker audio is lowered due to current limitations in the intrinsically safe handset.
54
Avaya 374x DECT Telephones - User Guide
to answer the call, or press
1
. The name or number of the calling party is displayed if calling line
Settings
Sound and Alert Settings
on page 46.
on page 114.
on page 90.
to answer the call in
Answering a Text
02/2016