Avaya 3740 User Manual page 120

Voice mail number not
defined
Could not encrypt
connection
Not allowed
LED Error Indications
See also chapter
LED is flashing red, quick flash, (100 ms on, 800 ms off)
1. 1) If a third handset, that is another handset other than the old replaced handset or new
replacement handset, is inserted into the charger during Easy Replacement, this error
indication appears. Replace the correct handset.
120
Avaya 374x DECT Telephones - User Guide
There is no Voice mail number
defined in the handset.
The parameter "Encryption
Required" is enabled in the
handset in combination with;
1) Unencrypted base station(s);
and/or,
2) Unsupported base station(s). 2) Enable the encryption in
1) The user cannot login to the
handset with the shared phone
functionality enabled, due to
another handset currently using
the same extension (User).
2) The user cannot logout from
the handset with the shared
phone functionality enabled, due
to incorrect password (AC code).
3) The extension (User) does not
exists.
4) The password is not correct. 4) Make sure that you have
LED Indications during Easy Replacement
Define a Voice mail number
via PDM/Device Manager.
1) Disable the "Encryption
required" parameter in
handset via PDM/Device
Manager; and/or,
the base station(s); and/or,
3) Use supported base
station(s). Ask your supplier.
1) Logout from the handset
that uses the same extension.
2) Enter #11*<AC code># on
the keypad and press the
off-hook key to logout from
the shared phone.
3) Make sure that you entered
correct extension. If needed,
contact the system
administrator.
entered correct password.
Ask the system administrator
if you have forgot the
password.
on page 127.
02/2016