Avaya 3740 User Manual page 127

4, 5
6, 7
8
LED Indications during Easy Replacement
The following table shows the LED indications that are used for the handset and the charger
during the easy replacement procedure.
LED indication
Orange, flashing (1 000 ms on, 1 000
ms off)
Orange, flashing (100 ms on, 800 ms
off)
Red, flashing (100 ms on, 800 ms off) Error indication during Easy Replacement. Put
Avaya 374x DECT Telephones - User Guide
When the text "Please insert old phone in charger" is displayed, replace the new
handset with the old handset. The handset can either be switched on or off.
Note: If the CR3 Charging Rack is used, the left charging slot must be
used for both handsets.
The handset is restarted and after a few seconds, the text "Saving settings. Do
not remove phone from charger" appears. The charger LED changes to slow
orange flashing. It may take several minutes.
!
Important:
If the old handset cannot communicate with the charger,
Important:
put the new handset in the charger to restore its settings
(that is, the handset's IPDI). If this step is not performed,
the new handset must be sent for service. The old
handset's settings might be transfered to the new
handset by using PDM/Device Manager. See the
handset's Configuration Manual.
When the text "Please insert new phone in charger" is displayed, replace the old
handset with the new handset. The text "Restoring settings" is displayed.
!
Important:
Do not remove the handset while the text "Restoring
Important:
settings" is displayed
When the text "Phone successfully replaced. Please remove phone to restart."
appears in the display, remove the handset from the charger. The handset is
automatically restarted.
Description
File transfer during Easy Replacement.
"Change phone" indication during Easy
Replacement.
back new handset in charger.
Maintenance
127
02/2016