Procedure Call - Avaya 3740 User Manual

Change profile - when the handset is placed in the charger it changes profile. When the
●
handset is removed from the charger, the profile is changed back.
Press "Edit" and select the wanted profile. By default only the profile Normal is visible, but
additional profiles is visible if they are configured. See
Note: Message absence - When an application or system sends a message to a handset, it receives an
indication that the handset is absent. If a handset is absent, the application or system determines if the
message are sent to the handset or not, or redirected to another handset.
If a message is sent from a handset, it does not receive an indication that the recipient is absent. This
function must be programmed in the PBX to be able to redirect calls/messages.

Procedure Call

When configuring the functions Call services, In Call menu, Contacts, or a shortcut/service to
the Phone call function, the data added in these functions is static. When entering the data for
the function to be used, it is possible to add a variable/character U that allows the user to enter
additional numerical characters before calling the number/sending the data to a system.
See the following example for more information.
Example of configuration:
A user wants to create a service with the Phone call function. The PBX requires that a prefix
must be added to a phone number. In this case, the user can pre-program the prefix and then
enter the applicable phone number when using the Phone call function.
1. Press "Menu", or the confirmation button.
2. Select "Services""My Favourites".
3. Select "Add new".
4. In the Name field, enter "Call no.".
5. Select the function "Phone call".
6. In the Number field, enter the prefix to be used followed by the character "U". In this case,
the text string is as follows *21*U. The character U represents an Enter number dialog
where the user can enter the phone number.
7. Press "Save".
When using the function, an Enter number dialog appears, see figure below. If the user enters
"123" (or selects a contact with this number by pressing
*21*123 is dialed. Note that no call is established before the user presses "OK", that is,
post-dial.
Avaya 374x DECT Telephones - User Guide
Procedure Call
Profiles on page 42
) and presses "OK", the number
02/2016
107