Calling A Ptt Group - Avaya 3740 User Manual

Figure 6: Incoming invitation received as call
1. Press "Accept", or
Default the handset starts in inverted mute and loudspeaking mode, but it can be
configured differently in a PTT group.
2. Press and hold
again when
Invitation received as incoming call during an ongoing call:
If a user receives an invitation during an ongoing call, it is displayed as an ordinary invitation,
see figure 6 on page 70. The user can either accept or decline the invitation by pressing
"Accept" or "Decline", respectively.
NOTE: It is not possible to accept or decline the invitation by pressing
If the user presses "Accept", the ongoing call is disconnected and the PTT call is connected.
Alternatively, the ongoing call can also be disconnected and the PTT call connected if the
following is fulfilled:
The handset is configured to answer invitations automatically
●
The user does not respond to the invitation within 10 seconds
●
If the user declines the invitation, the he/she can re-join the PTT later on, see
group on page 71.

Calling a PTT Group

NOTE: PTT group(s) must be defined in the PDM/Device Manager and Messaging Group(s) in
AIWS2 to be able to use this function. See the handset's Configuration Manual, and Installation and
Operation Manual for AIWS2.
1. Press "Menu".
2. Select
3. Select "PTT groups".
4. Select PTT group.
70
Avaya 374x DECT Telephones - User Guide
.
to open the microphone for transmitting. The microphone is muted
is released.
in the menu.
or , respectively.
Re-joining a
02/2016