Adding a contact
Note: If the parameter Stimuli call phonebook lookup is disabled, the system-provided call information
is used. This means that if a calling party's name is saved in the phonebook, it is not be displayed. This
function is applicable in legacy systems only (stimuli).
Adding a new contact
1. Enter the menu by pressing "Menu".
2. Select
3. Select "Add contact".
4. Select "New".
5. Select "Add".
6. Enter a name, see
7. Press "OK".
8. Select "Work Number", "Mobile number", or "Other number".
9. Press "Add".
10. Enter number. A tone "T" or pause "P" can be included in phone numbers by
pressing
11. TIP: A variable or character U can be added to the Work/Mobile/Other number field to
allow the user to enter additional numerical characters before calling the number. See
Admin menu
12. Press "OK".
13. Press "Save".
A specific ring signal can be set for each contact, see
page 75.
Adding from a call list
1. Enter the menu by pressing "Menu".
2. Select
3. Select "Add contact".
4. Select "From call list".
5. Select number in the list.
6. Press "Add".
7. Select Work Number", "Mobile number", or "Other number".
8. Press "Add".
9. Enter name, see
74
Avaya 374x DECT Telephones - User Guide
in the menu.
Alphanumeric keys
5 times or 7 times, respectively.
on page 109 for more information.
in the menu.
Alphanumeric keys
on page 37.
Set Ring Signal for a Contact
on page 37.
on
02/2016