Alarm Operations For 3749 Telephones; Push-Button Alarm; Test Alarm; Personal Alarm - Avaya 3740 User Manual

Alarm Operations for 3749 telephones

Note: The alarm settings described in this chapter can only be configured in PDM or AIWS.

Push-Button Alarm

The push-button
By default, long press is defined for test alarm (see
is defined for personal alarm (see

Test Alarm

Press and hold the push-button
displayed.
Depending on set parameters, following occur:
A beep is heard.
●
The orange LED flashes twice.
●
The vibrator stirs.
●
The telephone receives a notification that the alarm has been received by the system. This
●
is a system dependent feature.
An acoustic location signal (ALS) is played. See
●
A call to a predefined number is established. See
●
Note: When the vibrator is enabled, the telephone will alternate between vibration and sound. That is,
vibration and sound are not activated simultaneously. The ALS will no be played if the Automatic call
after alarm option is enabled.

Personal Alarm

Press the push-button
displayed. Depending on set parameters, following occur:
A beep is heard.
●
The orange LED flashes twice.
●
The vibrator stirs.
●
100
Avaya 374x DECT Telephones - User Guide
can be defined to send an alarm by a long press and by multiple press.
Personal Alarm
until the dialog window Test Alarm (default) is
twice or more, the dialog window Personal Alarm (default) is
Test Alarm on page 100), and multiple press
on page 100).
Acoustic Location Signal
Automatic Call after Alarm
on page 101.
on page 102.
02/2016