Calling
Incoming Call
The flashing LED, accompanied by a ring signal and/or a vibrating telephone, give you notice of
a call. Ring signal and vibrator can be disabled. The handset will ring in the connected headset
even if the handset is set to silent or the ringer volume level is set to silent. The calling party's
telephone number or name is shown. The name will be shown if the calling party's telephone
number is stored in the local phonebook. Press the Off-hook key to answer the call. When a
headset is connected to the telephone, the answering button on the headset can be used to
answer the call.
Other answering methods can also be set in the Settings menu, see
answering methods are Automatically and Loudspeaking.
Answer a Call
Your telephone rings.
1. Press Off-hook key or press the Soft key
Decline a Call
Your telephone rings.
1. Press On-hook key to decline the call.
Note:
A priority call cannot be declined.
Note:
End a Call
1. Press On-hook key to end the call.
The duration of the call is shown in the display.
Note:
The total time of the call can also be retrieved from the menu Calls > Call time.
Note:
Avaya 3740 and 3749 DECT Telephone - User Guide
Settings
to answer the call in loudspeaking mode.
Calling
on page 44. The
49
11/2010