Configure Thermal Printer - LevelOne WHG-1000 User Manual

4.5.2.3.4

Configure Thermal Printer

WHG-1000 can generate ticket of On-Demand users manually or automatically from Thermal Printer. Please click
on Service Domain → Authentication → On-Demand → Thermal Printer Setup to enter the Thermal Printer
List page. In the Thermal Printer List page. Administrator may configure Thermal Printer setting and generate
tickets manually and delete tickets.
If administrator wants to generate tickets from Thermal Printer, system must use DSA-1000 to control
Thermal Printer.

Status : Denote the current status of thermal printer

IP Address : Denote the IP address of DSA-1000 serial server

Command Port : Denote the command port of DSA-1000 serial server

COM Port : Denote the COM port of DSA-1000 serial server to connect to thermal printer

Date : Denote balance date of thermal printer

Description : Denote the additional information of thermal printer

Actions : Click an action button to perform the appropriate action.
 Edit : Click this option to edit the respective settings of thermal printer. There are 10 thermal printer can be
edited. Each thermal printer can specified billing plan
 Info : Click this option to view accounts list and information of the respective billing plan from thermal
printer created
Click Edit button to enter Thermal Printer Setup page. In the Thermal Printer Setup page, administrator may
configure related settings.
WHG-1000 300Mbps Wireless PoE Hotspot Gateway
84
User's Manual