Right Crankcase Cover Installation - Honda CRF50F 2004-2015 Service Manual

Install the return spring and stopper arm as shown
and tighten the boll to the specified torque.
TORQUE: 13 N ·m (1 .3 kgf-m .9Ibf·ft )
Install the gearshift pedal so that
it
is same height as
the footpeg.
Install the pinch bolt and tighten it.
Install the primary driven gear and clutch assembly
(page 9-14)
RIGHT CRANKCASE COVER
INSTALLATION
Install the clutch lifter plate/adjusting bolt into the
right crankcase cover by aligning its pin w ith the
hole in the crankcase cover.
Coat a new O-ring with engine oil and install it into
the cover groove properly.
Install the washer and lock nut.
CLUTCH/GEARSHIFT LINKAGE
WASHER
9-19