Chapter 6 Speed Dome Configuration; Configuring Local Parameters - HIKVISION E SERIES User Manual

Network speed dome

Hide thumbs Also See for E SERIES:

Table of Contents

User Manual of E Series Network Speed Dome

Chapter 6 Speed Dome Configuration

The local configuration refers to the parameters of the live view and other operations

using the web browser.

Steps:

Enter the Local Configuration interface:

Configuration > Local Configuration

2. Configure the following settings:



Live View Parameters: Set the protocol type, stream type, image size and live view

performance.



Protocol Type: TCP, UDP, MULTICAST and HTTP are selectable.

TCP: Ensures complete delivery of streaming data and better video quality, yet the

real-time transmission will be affected.

UDP: Provides real-time audio and video streams.

HTTP: Allows the same quality as of TCP without setting specific ports for streaming

under some network environments.

MULTICAST: It's recommended to select the protocol type to

the Multicast function. For other information about Multicast, refer to Section 6.3.1

Configuring TCP/IP Settings.



Live View Performance: Set the live view performance to Shortest Delay, or Auto.

Please set Live View Performance as Best Fluency for the high frame rate speed

Figure 6-1 Local Configuration Interface

when using

Table of Contents