Configuring Pppoe Settings; Configuring Ddns Settings - HIKVISION E SERIES User Manual

35
User Manual of E Series Network Speed Dome

6.3.3 Configuring PPPoE Settings

Purpose:
If you have no router but only a modem, you can use Point-to-Point Protocol over Ethernet
(PPPoE) function.
Steps:
1. Enter the
PPPoE Settings interface:
Configuration >Advanced Configuration > Network > PPPoE
Figure 6-10 PPPoE Settings
2. Check the Enable PPPoE checkbox to enable this feature.
3. Enter User Name, Password, and Confirm password for PPPoE access.
The User Name and Password should be assigned by your ISP.
4. Click to save and exit the interface.

6.3.4 Configuring DDNS Settings

Purpose:
If your speed dome is set to use PPPoE as its default network connection, you can use the
Dynamic DNS (DDNS) for network access.
Before you start:
Registration on the DDNS server is required before configuring the DDNS settings of the speed
dome.
Steps:
1. Enter the
DDNS Settings interface:
Configuration > Advanced Configuration > Network > DDNS
© Hikvision