Chapter 7 Record Settings; Configuring Nas Settings - HIKVISION E SERIES User Manual

User Manual of E Series Network Speed Dome

Chapter 7 Record Settings

Before you start:
To configure record settings, please make sure that you have the network storage device within
the network or the Micro SD card inserted in your speed dome.

7.1 Configuring NAS Settings

Before you start:
The network disk should be available within the network and properly configured to store the
recorded files, log files, etc.
Steps:
1. Add the network disk
(1) Enter the NAS (Network-Attached Storage) Settings interface:
Configuration > Advanced Configuration > Storage > NAS
(2) Select the NAS type as NFS or SMB/CIFS. If you select SMB/CIFS, you need to enter the
User Name and Password.
(3) Enter the IP address of the network disk. The default NFS storage format of file path is
/dvr/test as shown in Figure 7-2. And the default SMB/CIFS storage format of file path is
/test.
(4) Click Test to make sure that the NAS is connected successfully.(Optional)
The network disk file path name share is user-defined while creating the DVR
network storage. Please refer to the User Manual of NAS for creating the file path.
(5) Click
After having saved successfully, you need to reboot the speed dome to activate the
settings.
2. Initialize the added network disk.
© Hikvision
Figure 7-1 Select NAS Type
Figure 7-2 Add Network Disk
to add the network disk.
69