HIKVISION E SERIES User Manual page 97

89
User Manual of E Series Network Speed Dome
the right side, or click to show the network parameter panel.
 Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of the device
will be displayed in the Modify Network Parameters panel on the right side.
2. Edit the modifiable network parameters, e.g. IP address and port number.
3. Enter the password of the admin account of the device in the Password field and click
to save the changes.
Figure A.1.2 Modify Network Parameters
Restore default password

Steps:
1. Contact our technical engineers to get the serial code.
Serial No. is a series of characters combined by the start time and the serial number
of the device.
2. Input the code in the Serial No. field and click to restore the default password.
© Hikvision