HIKVISION E SERIES User Manual page 80

User Manual of E Series Network Speed Dome
Stream are selectable. If you select the sub stream, you can record for a longer time with
the same storage capacity.
The Pre-record and Post-record parameters vary depending on the speed dome
model.
4. Click
5. Choose the day to set the record schedule.
(1) Set all-day record or segment record:

If you want to configure the all-day recording, please check the All Day checkbox.

If you want to record in different time sections, check the Customize checkbox. Set the
Start Time and End Time.
The time of each segment can't be overlapped. Up to 8 segments can be
configured.
(2) Select a Record Type. The record type can be Normal, Motion Detection, Alarm, Motion
| Alarm, Motion & Alarm.

Normal
If you select Normal, the video will be recorded automatically according to the time of
the schedule.

Record Triggered by Motion Detection
If you select Motion Detection, the video will be recorded when the motion is
detected.
© Hikvision
to edit the record schedule.
Figure 7-8 Record Schedule
72