Safety Instruction - HIKVISION E SERIES User Manual

Network speed dome
Hide thumbs Also See for E SERIES:
Table of Contents

Advertisement

User Manual of E Series Network Speed Dome

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.
The precaution measure is divided into 'Warnings' and 'Cautions':
Warnings: Serious injury or death may be caused if any of these warnings are neglected.
Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
Warnings Follow these safeguards to prevent
serious injury or death.
Warnings:
 Please adopt the power adapter which can meet the safety extra low voltage (SELV) standard.
The power consumption cannot be less than the required value.
 Do not connect several devices to one power adapter as an adapter overload may cause
over-heating and can be a fire hazard.
 When the product is installed on a wall or ceiling, the device should be firmly fixed.
 To reduce the risk of fire or electrical shock, do not expose the indoor used product to rain or
moisture.
 This installation should be made by a qualified service person and should conform to all the
local codes.
 Please install blackouts equipment into the power supply circuit for convenient supply
interruption.
 If the product does not work properly, please contact your dealer or the nearest service
center. Never attempt to disassemble the product yourself. (We shall not assume any
responsibility for problems caused by unauthorized repair or maintenance.)
© Hikvision
Cautions Follow these precautions to prevent
potential injury or material damage.
iii

Advertisement

Table of Contents
loading

Table of Contents