Configuring Platform Access Settings; Configuring Https Settings - HIKVISION E SERIES User Manual

User Manual of E Series Network Speed Dome

6.3.12 Configuring Platform Access Settings


Configuring EZVIZ Cloud P2P
Purpose:
EZVIZ Cloud P2P provides the mobile phone application and as well the service platform page to
access and manage your connected NVR, which enables you to get a convenient remote access to
the surveillance system.
Steps:
1. Enter the Platform Access configuration interface.
Configuration > Advanced Configuration > Network > Platform Access
2. Check the checkbox of the Enable.
3. Select the Platform Type as the EZVIZ Cloud P2P in the dropdown list.
4. Click the Save button to activate the settings.
You can view the register status of the device in the corresponding text.

Configuring Ehome
Purpose:
Enabling the Ehome function, you can manage the device remotely after successfully connecting
the device to the Ehome platform.
Before you start:
Firstly you should register you device to the Ehome and keep the Device ID.
Steps:
1. Enter network settings interface.
Menu > Configuration > Network
2. Click the Extranet Access to enter extranet access interface.
3. Configure the Ehome parameters.
1) Click the
2) Input the following parameters.
Server IP: IP address of the Ehome server.
Server Port: Port of the Ehome server.
Device ID: ID of the device registering in the Ehome platform.
Register Status: Show the Device ID register status.
4. Click the Apply button to save the settings.
Among the EZVIZ Cloud P2P, DDNS and Ehome, you can only select one of them to enable.

6.3.13 Configuring HTTPS Settings

Purpose:
HTTPS is consisted by SSL&HTTP. It is used for encryption transmission, identity authentication
network protocol which enhances the security of WEB accessing.

To Create Self-signed Certificate:
Steps:
© Hikvision
checkbox of Enable Ehome.
44