Configuring Text Overlay Settings; Configuring And Handling Alarms - HIKVISION E SERIES User Manual

User Manual of E Series Network Speed Dome

6.5.3 Configuring Text Overlay Settings

Purpose:
You can customize the text overlay.
Steps:
1. Enter the Text Overlay Settings interface:
Configuration > Advanced Configuration > Image > Text Overlay
2. Check the checkbox in front of textbox to enable the on-screen display.
3. Input the characters in the textbox.
4. Use the mouse to click and drag the red text frame
the text overlay position.
5. Click .
There are up to 4 text overlays configurable. When the video resolution is 1080p,
only one text overlay is supported. When PTZ direction, preset OSDs are displayed, the text
overlay is disabled.

6.6 Configuring and Handling Alarms

Purpose:
This section explains how to configure the network speed dome to respond to alarm events,
including motion detection, video tampering and exception. These events can trigger the alarm
actions, such as Notify Surveillance Center, Send Email, Trigger, etc.
For example, when motion detection is triggered, the network speed dome sends a notification
to an e-mail address.
© Hikvision
Figure 6-40 Text Overlay Settings
in the live view window to adjust
56