HIKVISION E SERIES User Manual page 25

User Manual of E Series Network Speed Dome
4. You can click to delete the preset.
You can configure up to 256 presets.

Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
For convenient preset selection, refer to the following steps to navigate to the preset you want.
Steps:
1. Select any preset from the list.
2. Click the preset number you need on the keyboard.
The following presets are predefined with special commands. You can only call them but
not configure them. For instance, preset 99 is the "Start auto scan". If you call the preset 99, the
speed dome starts auto scan function.
Preset No. Function
33 Auto flip
34 Back to initial position
35 Call patrol 1
36 Call patrol 2
37 Call patrol 3
38 Call patrol 4
39 IR cut filter in
40 IR cut filter out
41 Call pattern 1
42 Call pattern 2
43 Call pattern 3
44 Call pattern 4
45 One-touch patrol
92 Start to set limit stops
© Hikvision
Figure 4-5 Calling a Preset
Table 4-3 Special Presets
Preset No. Function
93
94
96
97
98
99
100
101
102
103
104
105
106
107
to call the preset.
Set limit stops manually
Remote reboot
Stop a scan
Start random scan
Start frame scan
Start auto scan
Start tilt scan
Start panorama scan
Call patrol 5
Call patrol 6
Call patrol 7
Call patrol 8
Fan On
Fan Off
17