HIKVISION E SERIES User Manual page 40

User Manual of E Series Network Speed Dome
 Select the Time Zone
Purpose:
When the speed dome is taken to another time zone, you can use the Time Zone function to
adjust the time. The time will be adjusted according to the original time and the time
difference between the two time zones.
From the Time Zone drop-down menu as shown in Figure 6-5, select the Time Zone in which
the speed dome locates.
 Configuring Daylight Saving Time (summer time)
Purpose:
If there is the habit of adjusting clocks forward in your country in certain time period of a
year, you can turn this function on. The time will be adjusted automatically when the
Daylight Saving Time(DST) comes.
Steps:
(1) Enter the DST interface by Configuration > Advanced Configuration > System > DST
(2) Check
(3) Set the date of the DST period.
(4) Click
© Hikvision
Figure 6-4 Time Sync Manually
Figure 6-5 Time Zone Settings
to enable the DST function.
to save the settings.
Figure 6-6 DST Settings
32