Configuring Video Tampering Alarm - HIKVISION E SERIES User Manual

User Manual of E Series Network Speed Dome
Check the checkbox to select the linkage method. Notify surveillance center, send email,
upload to FTP, trigger channel and trigger alarm output are selectable.

Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event
occurs.

Send Email
Send an email with alarm information to a user or users when an event occurs.
To send the Email when an event occurs, you need to refer to Section 6.3.11
Configuring Email Settings to set the Email parameters.

Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP server.
You need a FTP server and set FTP parameters first. Refer to Section 6.3.8
Configuring FTP Settings for setting FTP parameters.

Trigger Channel
Record a video when an event occurs.
You have to set the recording schedule to realize this function. Please refer to
Section 7.2 Configuring Recording Schedule for settings the recording schedule.

Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
To trigger an alarm output when an event occurs, please refer to Section 6.6.4
Configuring Alarm Output to set the alarm output parameters.

6.6.2 Configuring Video Tampering Alarm

Purpose:
© Hikvision
Figure 6-45 Linkage Method
60