38
User Manual of E Series Network Speed Dome
Figure 6-15 SNMP Settings
Check the corresponding version checkbox (
,
,
2.
) to enable the feature.
3. Configure the SNMP settings.
The configuration of the SNMP software should be the same as the settings you
configure here.
4. Click
to save and finish the settings.
6.3.6 Configuring 802.1X Settings
Purpose:
The speed dome supports IEEE 802.1X standard.
IEEE 802.1X is a port-based network access control. It enhances the security level of the LAN.
When devices connect to this network with IEEE 802.1X standard, the authentication is needed. If
the authentication fails, the devices don't connect to the network.
The protected LAN with 802.1X standard is shown as follows:
© Hikvision