Configuring Motion Detection - HIKVISION E SERIES User Manual

User Manual of E Series Network Speed Dome

6.6.1 Configuring Motion Detection

Purpose:
Motion detection is a feature which can trigger alarm actions and actions of recording videos
when the motion occurred in the surveillance scene.
Steps:
1. Enter the motion detection setting interface:
Configuration > Advanced Configuration> Basic Event > Motion Detection
2. Check the checkbox of the Enable Motion Detection to enable this function.
You can check the Enable Dynamic Analysis for Motion checkbox if you want the detected
object get marked with rectangle in the live view.
3. Select the configuration mode as Normal or Expert and set the corresponding motion
detection parameters.

Normal
Steps:
(1) . Click and drag the mouse on the live video image to draw a motion detection
area.
(2) Click
• You can draw up to 8 motion detection areas on the same image.
• You can click
(3) Move the slider
detection.

Expert
© Hikvision
Figure 6-41 Motion Detection Settings-Normal
to finish drawing.
to clear all of the areas.
to set the sensitivity of the
57